Learn how to use PySpark in under 5 minutes (Installation + Tutorial)
Apache Spark is one of the hottest and largest open source project in data processing framework with rich high-level APIs for the programming languages like Scala, Python, Java and R. It realizes the potential of bringing together both Big Data and machine learning.
By Georgios Drakos, Data Scientist at TUI
I’ve found that is a little difficult to get started with Apache Spark (this will focus on PySpark) and install it on local machines for most people. With this simple tutorial you’ll get there really fast!
Apache Spark is a must for Big data’s lovers as it is a fast, easy-to-use general engine for big data processing with built-in modules for streaming, SQL, machine learning and graph processing. This technology is an in-demand skill for data engineers, but also data scientists can benefit from learning Spark when doing Exploratory Data Analysis (EDA), feature extraction and, of course, ML. But please remember that Spark is only truly realized when it is run on a cluster with a large number of nodes.
Table of Contents
- Spark definition
- Spark Application
- Install PySpark on Mac
- Open Jupyter Notebook with PySpark
- Launching a SparkSession
Apache Spark is one of the hottest and largest open source project in data processing framework with rich high-level APIs for the programming languages like Scala, Python, Java and R. It realizes the potential of bringing together both Big Data and machine learning. This is because:
- Spark is fast (up to 100x faster than traditional Hadoop MapReduce) due to in-memory operation.
- It offers robust, distributed, fault-tolerant data objects (called RDDs)
- It integrates beautifully with the world of machine learning and graph analytics through supplementary packages like MLlib and GraphX.
Spark is implemented on Hadoop/HDFS and written mostly in Scala, a functional programming language.However, for most beginners, Scala is not a great first language to learn when venturing into the world of data science.
Fortunately, Spark provides a wonderful Python API called PySpark. This allows Python programmers to interface with the Spark framework — letting you manipulate data at scale and work with objects over a distributed file system. So, Spark is not a new programming language that you have to learn but a framework working on top of HDFS.
This presents new concepts like nodes, lazy evaluation, and the transformation-action (or ‘map and reduce’) paradigm of programming.In fact, Spark is versatile enough to work with other file systems than Hadoop — like Amazon S3 or Databricks (DBFS).
Internet powerhouses such as Netflix, Yahoo, and eBay have deployed Spark at massive scale, collectively processing multiple petabytes of data on clusters of over 8,000 nodes.
Typically when you think of a computer you think about one machine sitting on your desk at home or at work. This machine works perfectly well for applying machine learning on small dataset . However, when you have huge dataset(in tera bytes or giga bytes), there are some things that your computer is not powerful enough to perform. One particularly challenging area is data processing. Single machines do not have enough power and resources to perform computations on huge amounts of information (or you may have to wait for the computation to finish).
A cluster, or group of machines, pools the resources of many machines together allowing us to use all the cumulative resources as if they were one. Now a group of machines alone is not powerful, you need a framework to coordinate work across them. Spark is a tool for just that, managing and coordinating the execution of tasks on data across a cluster of computers.
A Spark Application consists of:
- Executors (set of distributed worker processes)
The Driver runs the main() method of our application having the following duties:
- Runs on a node in our cluster, or on a client, and schedules the job execution with a cluster manager
- Responds to user’s program or input
- Analyzes, schedules, and distributes work across the executors
An executor is a distributed process responsible for the execution of tasks. Each Spark Application has its own set of executors, which stay alive for the life cycle of a single Spark application.
- Executors perform all data processing of a Spark job
- Stores results in memory, only persisting to disk when specifically instructed by the driver program
- Returns results to the driver once they have been completed
- Each node can have anywhere from 1 executor per node to 1 executor per core
** Node is single entity machine or server .
Spark’s Application Workflow
When you submit a job to Spark for processing, there is a lot that goes on behind the scenes.
- Our Standalone Application is kicked off, and initializes its SparkContext. Only after having a SparkContext can an app be referred to as a Driver
- Our Driver program asks the Cluster Manager for resources to launch its executors
- The Cluster Manager launches the executors
- Our Driver runs our actual Spark code
- Executors run tasks and send their results back to the driver
- SparkContext is stopped and all executors are shut down, returning resources back to the cluster
Install Spark on Mac (locally)
First Step: Install Brew
You will need to install brew if you have it already skip this step:
1. open terminal on your mac. You can go to spotlight and type terminal to find it easily (alternative you can find it on /Applications/Utilities/).
2. Enter the command bellow.
3. Hit Return and the script will run. It will output to your terminal a log of what is going to install. Hit Return to continue or any other key to abort.
4. It might ask for sudo privileges. If this happens you will have to type your admin password and hit Return again.
Notes: Command line tools (Apple's XCode) will be installed after this guide.
The installation will look like as the image below.
When the installation finishes successfully it will look as the image below.
By default Homebrew is sending anonymous data and analytics. You can find additional information here. You can choose to opt-out by running the command.
Second Step: Install Anaconda
In the same terminal just simple type:
$ brew cask install anaconda. Please see resources section in case you face any issue in that step.
Third final Step: Install PySpark
1. ona terminal type
$ brew install apache-spark
2. if you see this error message, enter
$ brew cask install caskroom/versions/java8to install Java8, you will not see this error if you have it already installed.
3. check if pyspark is properly install by typing on the terminal
$ pyspark. If you see the below it means that it has been installed properly:
Open Jupyter Notebook with PySpark Ready
This section assumes that PySpark has been installed properly and no error appear when typing on a terminal
$ pyspark. At this step, I present the steps you have to follow in order create Jupyter Notebooks automatically initialised with SparkContext.
In order to create a global profile for your terminal session, you will need to create or modify your .bash_profile or .bashrc file. Here, I will use .bash_profile as my example
1. Check if you have .bash_profile in your system
$ ls -a, if you don't have one, create one using
$ touch ~/.bash_profile
2. Find Spark path by running
$ brew info apache-spark
3. If you already have a .bash_profile, open it by
$ vim ~/.bash_profile, press
I in order to insert, and paste the following codes in any location (DO NOT delete anything in your file):
ESC to exit insert mode, enter
:wq to exit VIM. You could fine more VIM commands here.
5. Refresh terminal profile by
$ source ~/.bash_profile
My favourite way to use PySpark in a Jupyter Notebook is by installing findSparkpackage which allow me to make a Spark Context available in my code.
findSpark package is not specific to Jupyter Notebook, you can use this trick in your favorite IDE too.
Install findspark by running the following command on a terminal
Launch a regular Jupyter Notebook and run the following command:
The output should be:
Please note that with Spark 2.2 a lot of people recommend just to simply do
pip install pyspark .I try using
pip to install
pyspark but I couldn’t get the
pysparkcluster to get started properly. Reading several answers on Stack Overflow and the official documentation, I came across this:
The Python packaging for Spark is not intended to replace all of the other use cases. This Python packaged version of Spark is suitable for interacting with an existing cluster (be it Spark standalone, YARN, or Mesos) - but does not contain the tools required to setup your own standalone Spark cluster. You can download the full version of Spark from the Apache Spark downloads page.
Therefore, I would suggest to follow the steps that I described above.
Launching a SparkSession
Well, it’s the main entry point for Spark functionality: it represents the connection to a Spark cluster and you can use it to create RDDs and to broadcast variables on that cluster. When you’re working with Spark, everything starts and ends with this SparkSession. Note that SparkSession is a new feature of Spark 2.0 which minimize the number of concepts to remember or construct. (before Spark 2.0.0, the three main connection objects were SparkContext, SqlContext and HiveContext).
In interactive environments, a SparkSession will already be created for you in a variable named spark. For consistency, you should use this name when you create one in your own application.
You can create a new SparkSession through a Builder pattern which uses a "fluent interface" style of coding to build a new object by chaining methods together. Spark properties can be passed in, as shown in these examples:
At the end of your application, please remember to call
spark.stop() in order to end the SparkSession. Let's understand the various settings that we define above:
master: Sets the Spark master URL to connect to, such as “local” to run locally, “local” to run locally with 4 cores, or “spark://master:7077” to run on a Spark standalone cluster.
config:Sets a config option by specifying a (key, value) pair.
appName: Sets a name for the application, if no name is set, a randomly generated name will be used.
getOrCreate:Gets an existing
SparkSessionor, if there is no existing one, creates a new one based on the options set in this builder. In case an existing SparkSession is returned, the config options specified in this builder affecting the
SQLContextconfiguration will applied. As
SparkContextconfiguration cannot be modified on runtime (you have to stop existing context first) while
SQLContextconfiguration can be modified on runtime.
Spark has seen immense growth over the past several years. Hundreds of contributors working collectively have made Spark an amazing piece of technology powering the de facto standard for big data processing and data sciences across all industries. But please remember to use it for manipulations of huge dataset when facing performance issues otherwise it may have opposite effects. For small datasets (few gigabytes) it is advisable instead to use Pandas.
Thanks for reading and I am looking forward to hearing your questions :)
Stay tuned and Happy Machine Learning.
Bio: Georgios Drakos is a Data Scientist with a BSc and MSc in Electrical and Computer Engineering (National Technical University of Athens) as well as a MSc from Imperial College London, currently working as a Data Scientist for TUI in the travel industry. He specialised in Computational Intelligence for Decision Support, Data Engineering, Sophisticated Analytics and Technological Innovation Management. Highly interested in Cloud-based technologies, Distributed Computing, Big Data and the business applications of Data Science & Machine Learning.
Original. Reposted with permission.
- Spark NLP: Getting Started With The World’s Most Widely Used NLP Library In The Enterprise
- Scalable Python Code with Pandas UDFs: A Data Science Application
- Analyzing Tweets with NLP in Minutes with Spark, Optimus and Twint
Top Stories Past 30 Days